Shanghai Fengxian Equipment Vessel Factory
Shanghai Fengxian Equipment Vessel Factory Ingenious Intelligent Manufacturing, Create a Centennial Brand
Add to Cart
1. Function
Sand blasting tank is the core part of sand blasting system. Its performance directly affects whether the sand blasting system is normal, efficient. The working principle of the sand blasting tank is pressure type: The tank can work with multiple abrasive control valve at the same time, while high speed spray gun work.It has a high degree of automation and high working efficiency.
2. Performance characteristics
| Push-in work, high working pressure (0.6-0.8MPa), strong spray force, high efficiency. |
| Start fast, close the gun sensitive. |
| Wheeled structure, easy to move. |
| Small size, easy to add sand, suitable for single operation. |
| Using the United States advanced sand valve structure, can accurately adjust the size of sand and air pressure. |
| The use of standardized pressure vessel manufacturing standards, in line with national, industry norms, safe and reliable. |
| Equipped with wear-resistant sandblasting pipe and nozzle, to ensure a long time normal operation. |
| Simple operation, easy maintenance, maintenance, low cost of use. |
| Sand, dust, dirt and other automatic recovery of more than 95%, no dust pollution and sand splash, to meet environmental requirements, sand, dust and impurities to filter their own separation, sand recycling to achieve recycling; mobile flexible, reliable performance, failure Low reliability, unique and advanced gas control, easy operation and maintenance, clean the working environment, is conducive to the health of the staff. |
3. Instructions
| 1. Wear a protective helmet |
| 2. Close the exhaust switch and drain switch, the screen of the abrasive added to the tank (preferably not higher than the tank, otherwise it will affect the life of the closed valve); |
| 3. Open the intake valve, with both hands to hold the blasting pipe gun nozzle connector one end, not the muzzle on the people; |
| 4. Press the remote control switch to adjust the size of the sand and gas |
| 5. Host work in a high-pressure state, not free to move; |
| 6. The use of the equipment pressure can not exceed 0.8Mpa; |
4. Spare List (Single Spray Lance)
| 1 | Manual Valve x 1 |
| 2 | Ball Valve x 3 |
| 3 | Oily Water Separator x 1 |
| 4 | Cross x 1 |
| 5 | Silencer x 1 |
| 6 | Union x 3 |
| 7 | Clamp x 3 |
| 8 | Quick Coupling x 2 |
| 9 | Nozzle x 1 |
| 10 | Reflux Valve x 1 |
| 11 | Rubber hose for sand and grit blasting x 1 |
5. Packing & Delivery
Plywood packing or packing as clients' request.
6. Application
(A) workpiece coating, workpiece bonding pretreatment
Sandblasting can remove all dirt from the surface of the workpiece and build a very important base pattern on the surface of the workpiece (that is, the so-called hair surface), and can exchange different sizes of abrasives to achieve varying degrees of roughness Degree, greatly improve the workpiece and paint, plating the bonding force. Or make the adhesive bonding more solid, better quality.
(2) casting and forging surface, heat treatment after the workpiece cleaning and polishing
Sandblasting can clean up the casting and forging, heat treatment after the workpiece surface of all dirt (such as oxide, oil and other residues), and the workpiece surface polishing to improve the smoothness of the workpiece, play a role in beautifying the workpiece.
Blasting can make the workpiece exposed to uniform metal color, so that the appearance of the workpiece more beautiful, to beautify the decorative effect.
(3) machined parts burr cleaning and surface beautification
Blasting can clean up the surface of the tiny burrs on the surface of the workpiece and make the surface of the workpiece even more flat, eliminating the burrs and improving the grade of the workpiece. And Yoshikawa sandblasting machine sandblasting at the junction of the workpiece surface to play a small rounded, so that the workpiece is more beautiful, more sophisticated.
(D) to improve the mechanical properties of parts
After the blasting of the mechanical parts, the surface of the parts can produce uniform fine and concave surface (basic pattern), so that the oil is stored, so that the lubrication conditions improved and reduce noise to improve the mechanical life.
7. Details
