Shanghai Fengxian Equipment Vessel Factory
Shanghai Fengxian Equipment Vessel Factory Ingenious Intelligent Manufacturing, Create a Centennial Brand
Add to Cart
8mm compressed air tank for storage ethanol , CNG , Glp / air compressor holding tank
1. Company Profile
Shanghai Fengxian Equipment Vessel Factory was founded in 1982, and specializes in designing and manufacturing all kinds of pressure vessels. We have a high profile in the industry. And in 1998, we registered the brand of “Shen Jiang”. Our pressure vessels are widely used in petroleum, chemical, electronic, automotive, power generation, mining, pharmaceutical and other industries. Look forward to the cooperation with you in the increasingly powerful of our company.
2. The important of compressed air tank plays in air compressor system ?
An air receiver tank is an integral and important part of any compressed air system. Typically a receiver tank is sized at 6-10 times the flow rate of the system. So, if a compressor has a rating of 25 cfm at 100 psi, the receiver tank should be 150 cubic feet, minimum. In a compressed air system, a receiver tank provides the following benefits:
Much like a water reservoir provides water during times of drought and stores water during the wet times, an air receiver tank compensates for peak demand and helps balance the supply of the compressor with the demand of the system.
Receiver tanks are required by law to have a pressure relief valve and a pressure gauge. The relief valve should be set to 10% higher than the working pressure of the system.
It is also important to install either a manual or automatic drain on the receiver tank to remove water from the system.
2. Product Specifications
| Brand: | SHENJIANG |
| Product name: | 2000 liter pinkish blue horizontal air receiver tank |
| Temperature | 100 C |
| Diameter | 1000mm |
| Product Size: | 2962 *1000*1000MM |
| Packing size | 3100*1000*1200mm |
| Package | Standard exporting wooden packing |
| Material: | Q345R |
| Pressure | 10Mpa |
| Design pressure | 10.5MPA |
| Air out let | 80mm |
| Relief valve connector | Rp3/4" |
| X-RAY check | 100% |
| Available Color: | As required |
| Certification: | CE ASME Approved |
3. Product advantages
| 1. Design | Free design according customer's requirement |
| 2. Finished | With in house Blast Cleaning and Paint Spray facilities, Internal and External finishes to specific BS/EN/ISO standards are common practice. Galvanization, Epoxy Resin, DWI approved paint, and other finishes at your request. |
| 3. Testing | Materials, Processes, and Final Products are tested in a variety of ways, including: X-Ray, Tensile Tests, Hardness Tests, Dye Penetration, Hydrostatic, Radiographic etc. |
| 4. Document | Full Certification can be supplied: – Certificates of Conformity, Hydraulic tests, weld procedures, weld tests, material certificates, pressure gauges, relief valves etc. upon your request. |
4. Our Advantages
| 1 | Double-sided welding for all the connecting pipes |
| 2 | All the connecting pipes are sealed by plastic parts |
| 3 | Section design for the air inlet |
| 4 | Sewage valve with elbow design |
| 5 | Longitudinal seam, ring seam welding, double - sided submerged arc welding |
| 6 | Surface treatment: sandblasting , primer (2 times), finish |
5. Our Clients
BAOSTEEL, TOSHIBA, CONCH, SPC, DAS AUTO, CHINA SHENHUA, HONGTA GROUP, FOXCONN,
BMW, CSIC, WALT DISNEY, BOSCH, ANSTEEL, SINOMA, etc.
